Ruangcakrawala.com – How to Fix Windows Module Installer Worker High CPU Usage On Windows 10. Hello friends rgcakrawala, meet me again with the admin here who will certainly continue to share interesting, latest and viral info every day to all of you.
Windows 10 users have reported that an item called Windows Modules Installer Worker is consuming a significant amount of CPU power on their device.
It frequently consumes more than half of your CPU resources, and in extreme cases, it can reach 100%.
This causes the computer to run slowly and poses a number of risks, such as overheating or damaged hardware.
Windows Module Installer Worker is an important PC tool that assists the PC in automatically checking for Windows updates.
It is a necessary tool if you want Windows to automatically check for updates on your PC or laptop because it runs while checking for and installing any Windows Updates.
Windows Modules Installer Worker (or TiWorker.exe) is essentially a Windows Update Service. It searches for and installs newly available Windows system updates on your computer.
This process will be running whenever your system looks for updates automatically or when you start a search for updates manually.
When users experience unexpected slowdowns and open the Task Manager to investigate, they may notice the Windows Modules Installer Worker consuming up to 100% CPU usage.
As a result, some users associate the Windows Update Installer worker with CPU usage problems while the tool searches for available updates.
You can learn How to Fix Windows Module Installer Worker High CPU Usage On Windows 10 in below steps.
Is Windows Modules Installer Worker Malware Or Virus On Windows 10?
Some users may suspect a virus when they notice Windows Module Installer Worker High CPU Usage or modules installer worker high disk usage.
It is not malware or virus.
Windows modules installer worker is a necessary component of the Windows operating system that is used for Windows Updates. So you don’t have to be concerned.
If you are still concerned, you can run any of the virus scans using a quality antivirus solution or use the assistance of a Windows defender.
Use the methods listed below to resolve Windows Modules Installer Worker – High CPU Usage.
1. You Must Remove the SoftwareDistribution Folder
When attempting to troubleshoot this issue, the first step should be to delete a folder called SoftwareDistribution.
By default, new updates are stored in this folder. A corrupt file stored here can cause a variety of errors with the Windows Modules Installer Worker.
Deleting the folder poses no risk because Windows 10 will create a new folder with the same name when a new update is found.
Please keep in mind that you may need access to an administrator account to complete this method.
- Disable the Windows Update service temporarily by following these steps:
- To open the Run utility, press the Windows + R keys on your keyboard.
- Enter “services.msc” without the quotation marks, and then press the OK button. The Services window will be displayed.
- Track down the Windows Update service. Right-click it and choose Pause/Stop.
- Navigate to C:Windows using the File Explorer.
- Right-click on the SoftwareDistribution folder and select Properties. From the context menu, select Delete.
- Restart your device to see if the Windows Modules Installer Worker problem has been resolved.
2. Start the Windows Update Service again
Because the update service isn’t running properly, your Windows Modules Installer Worker may be consuming a lot of resources. Simply follow the steps below to check and correct this.
- On your keyboard, press the Windows + R keys. This will bring up the Run utility.
- To launch Services, enter “services.msc” and press the OK button. This may take a few moments to fully load.
- Scroll all the way down to the Windows Update service. Select the “Stop” option from the context menu.
- Wait 30 seconds before proceeding.
- Right-click the Windows Update service once more and choose “Start.” This will completely restart the service.
3. Attempt to use the Windows Update Troubleshooter
Microsoft has released a dedicated tool to assist in the resolution of issues with Windows updates.
This tool is free to use and can be downloaded by anyone, even those without a Microsoft Account.
All you have to do is run the tool and see if it can detect and correct any errors.
- Get the Windows Update Troubleshooter here.
This download link comes directly from Microsoft’s website, which has been verified, trusted, and is completely safe. - Double-click the WindowsUpdate.diagcab file you just downloaded to open it.
This opens the troubleshooter window. - Follow the instructions on the screen.
If the troubleshooter detects any problems, simply click on them to apply a fix or get more information on your problem.
It should be noted that the Windows Update Troubleshooter is not perfect. Even if it is unable to find any errors on its own, you should stick with our methods until you find something that works to resolve the Windows Modules Installer Worker High CPU error.
4. Run the System File Checker Utility (SFC scan)
The System File Checker is a tool that comes standard with Windows 10.
It is also known as a “SFC scan,” and it is the quickest way to automatically repair corrupted system files and other problems.
According to some users, running this scan prevented the Windows Module Installer Worker High CPU Usage issue from recurring.
- On your keyboard, press the Windows + R keys.
This will bring up the Run utility. - Enter “cmd” and then press Ctrl + Shift + Enter on your keyboard.
By doing so, you launch the Command Prompt with administrative privileges. - If prompted, accept the Command Prompt’s permission to make changes to your device.
- Type the following command into the Command Prompt and press Enter to execute it: scannow /sfc
- Wait for the SFC scan to complete scanning and repairing corrupt files on your computer. This may take some time; make sure you don’t close the Command Prompt or shut down your computer during this time.
- After the scan is finished, restart your device.
5. Make Use Of The DISM Command
By simply running commands in the Command Prompt application, you can identify and repair corruption issues with your system using the DISM tool.
It scans the entire system for corruption and attempts to restore damaged or missing files automatically.
- On your keyboard, press the Windows + R keys.
This will bring up the Run utility. - Enter “cmd” and then press Ctrl + Shift + Enter on your keyboard.
By doing so, you launch the Command Prompt with administrative privileges. - If prompted, accept the Command Prompt’s permission to make changes to your device.
- Once in the Command Prompt, launch the DISM scan, which will run and look for problems throughout the system. To run the command, type DISM.exe /Online /Cleanup-image /Scanhealth and press Enter.
- Following that, you must run a command to resolve any issues discovered on your system. Simply type the following line and press Enter once more: DISM.exe /Online /Image-cleanup /Restorehealth
- Wait for the process to complete. Close the Command Prompt window and restart your device when finished.
6. Turn Off Windows 10 Automatic Updates
Because the Windows Modules Installer Worker is part of Windows Update, you could try disabling automatic updates to reduce CPU usage. This can be accomplished by following the steps outlined below.
- To open the Settings app, press the Windows + I keys on your keyboard.
By clicking on the gear icon in the Start menu, you can also access Settings. - Select Update & Security.
- In the left panel, select Windows Update from the menu.
- Select Advanced Options.
- Using the drop-down menu, specify how long you want to pause updates.
You can disable updates for 35 days at a time, but you must repeat these steps every month to avoid automatic updates.
If you want to permanently disable Windows 10 updates, read our How to Disable Windows 10 Updates article.
7. Modify Your Internet Settings
You have access to Wi-Fi.
- To open the Settings app, press the Windows + I keys on your keyboard.
By clicking on the gear icon in the Start menu, you can also access Settings. - Select Network and Internet.
- Using the menu in the left-side panel, navigate to the Wi-Fi tab.
- Choose your existing Wi-Fi network.
- Scroll down to the Metered connection section and enable the Wi-Fi network’s Set as metered connection option.
You’ve got an Ethernet connection.
- On your keyboard, press the Windows + R keys. This will bring up the Run utility.
- Enter “regedit” without the quotation marks and click OK. This opens the Registry Editor in a new window.
- Locate the following key: SOFTWARE Microsoft Windows NT CurrentVersion NetworkList DefaultMediaCost HKEY LOCAL MACHINE
- Select Permissions… from the context menu of the DefaultMediaCost folder.
- Select the Add… option. Enter your username in the Enter the object names to select field and hit the Check Names button.
- Press the OK button.
- Select the newly added user and check the Allow square in the Full Control row. Close this window and return to the Registry Editor by clicking the OK button.
- In the DefaultMediaCost folder, double-click the Ethernet value and make sure the Data value is set to 2.
- Restart your computer by clicking the OK button.
End Of Word
Okay readers rgcakrawala, that’s all I can convey regarding the information How to Fix Windows Module Installer Worker High CPU Usage On Windows 10. Hopefully the information that we always share can be useful and help you all.